Share some CCNP Wireless 300-360 exam questions and answers below.
An 802.11n implementation is being discussed. Users are satisfied with the potential 300450 Mbps throughput of new 802.11n APs.
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. Clean Air helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
A Cisco 7925 phone at a client’s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
An engineer must design wireless coverage in thick-walled stairwells.
Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: A
An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. CleanAir helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
Our Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers are including all the questions which the exam required. So the materials will be able to help you to pass the exam.Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers of Passtcert is devoloped in accordance with the latest syllabus. At the same time, we also constantly upgrade our training materials. So our exam training materials is simulated with the practical exam. So that the pass rate of Passtcert is very high. It is an undeniable fact. Through this we can know that Passtcert Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers can brought help to the candidates.
After all, this is an authoritative test to inspect the computer professional knowledge and information technology ability. In order to pass the Cisco certification 300-360 exam, generally, many people need to spend a lot of time and effort to review.Passtcert can provide a shortcut for you and save you a lot of time and effort. Passtcert will provide good Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers and help you pass Cisco certification 300-360 exam.Related article: http://70-761-dumps.blogspot.com/2017/09/update-cisco-certification-300-360.html
No comments:
Post a Comment