Thursday, September 28, 2017

Cisco 210-065 CIVND exam latest dumps | Passtcert

They continue to use their IT knowledge and rich experience to study the previous years exams of Cisco 210-065 and have developed Cisco 210-065 CIVND exam latest dumps. So Passtcert newest exam practice questions and answers about Cisco certification 210-065 exam are so popular among the candidates participating in the Cisco certification 210-065 exam.Cisco 210-065 exam candidates all know the Cisco 210-065 exam is not easy to pass.

With Cisco 210-065 CIVND exam latest dumps, you will become full of confidence and not have to worry about the exam. However, it lets you get certified effortlessly.Passtcert can provide you a pertinence training and high quality exercises, which is your best preparation for your first time to attend Cisco certification 210-065 exam. Cisco 210-065 CIVND exam latest dumps are very similar with the real exam, which can ensure you a successful passing the Cisco certification 210-065 exam.
Share some CCNA Collaboration 210-065 exam questions and answers below.
Which DHCP option is used by video endpoints to locate the Cisco Communications Manager TFTP server to download the endpoints configuration? 
A. option 43 
B. option 82 
C. option 150 
D. option 176 
E. option 242 
Answer: C

Which option describes how to configure SNMP settings on a CTS/TX endpoint? 
A. can be configured only via codec CLI 
B. can be configured only via codec GUI 
C. can be configured only in a device profile in Cisco Unified Communications Manager 
D. can be configured either via codec GUI or codec CLI 
E. can be configured in codec GUI, codec CLI, or device profile in Cisco Unified Communications Manager 
Answer: C

Which two protocols can be used with the Cisco TelePresence Content Server to allow users to share content from their laptops? (Choose two.) 
A. BFCP 
B. H.239 
C. PCoIP 
D. Switched Presentation 
E. SCCP 
F. RDP 
Answer: A, B

Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU? 
A. Static A []
B. Network ip
C. Xconfig network address
D. Xconfig network address
Answer: A

In the H.264 video codec, which type of video frame is sent when the remote side requests a fast picture update?
A. I-frame
B. P-frame
C. B-frame
D. C-frame
Answer: A

Which well-known port is used to access the Cisco IP Video Surveillance Operations Manager via a secure, ActiveX web session?
A. 20
B. 80
C. 421
D. 434
E. 443
F. 8080
Answer: E

Which three features does Cisco VCS provide? (Choose three.)
A. native Cisco SCCP telephony integration
B. SIP-H.323 interworking functionality
C. native scheduling
D. SIP trunk integration with Cisco Unified Communications Manager
E. third-party standards-based H.323 and SIP device registration
F. reverse proxy functionality
Answer: B, D, E


Please select Passtcert, it will be the best guarantee for you to pass 210-065 certification exam. Now please add Passtcert to your shopping cart.Never say you can not do it. This is my advice to everyone. Even if you think that you can not pass the demanding Cisco 210-065 exam. You can find a quick and convenient training tool to help you. Cisco 210-065 CIVND exam latest dumps is a very good training materials.


Related article: http://840-425-dumps.blogspot.com/2017/09/210-065-implementing-cisco-video.html

Sunday, September 24, 2017

Latest cisco 210-060 CICD dumps

Passtcert IT expert team take advantage of their experience and knowledge to continue to enhance the quality of cisco 210-060 CICD dumps to meet the needs of the candidates and guarantee the candidates to pass the CCNA Collaboration certification 210-060 exam which is they first time to participate in. Through purchasing Passtcert cisco 210-060 CICD dumps, you can always get faster updates and more accurate information about the examination. It can give you 100% confidence and make you feel at ease to take the exam.

Share some CCNA Collaboration 210-060 exam questions and answers below.
A voice engineer is moving an IP phone from one secure Cisco Unified Communications Manager cluster to another. The phones are not registering to the new cluster. Which task resolves this issue? 
A. reset the phones 
B. restart the phones 
C. delete the CTL file from each phone manually 
D. use the Bulk Administration Tool to import the phones 
Answer: C

An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. A network engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified Communications Manager. 
How should the engineer instruct the user to launch the IP phone applications? 
A. Select the "?" button on the IP phone. 
B. Select the globe button on the IP phone. 
C. Select Settings > User Preferences. 
D. Select Settings > Device Configuration. 
Answer: B

An end user is running Cisco Jabber on the desktop. Which two icons must be selected to make a video call? (Choose two.) 
A. Contacts icon 
B. phone icon 
C. person icon 
D. message icon 
E. web video conferencing icon 
Answer: A,B

Which four fields must an administrator complete to create a new user in Cisco Unity Connection? (Choose four.) 
A. Alias 
B. User type 
C. Extension 
D. Corporate email address 
E. First name 
F. Last name 
G. Employee ID 
H. Template 
Answer: A,B,C,H

An end user is experiencing performance issues with their IP phone. Which phone feature could the administrator configure to allow the end user to notify them when issues occur? 
A. Cisco Quality Report Tool 
B. System Log Management 
C. Cisco CDR Analysis and Reporting 
D. Cisco JTAPI 
Answer: A

We guarantee you 100% certified. Passtcert is a very good website for Cisco certification 210-060 exams to provide convenience. According to the research of the past cisco 210-060 CICD dumps, Passtcert can effectively capture the content of Cisco certification 210-060 exam. Passtcert cisco 210-060 CICD dumps have a very close similarity with real examination exercises.The appropriate selection of training is a guarantee of success. However, the choice is very important, Passtcert popularity is well known, there is no reason not to choose it.


When we started offering cisco 210-060 CICD dumps, we did not think that we will get such a big reputation. What we are doing now is incredible form of a guarantee. Passtcert guarantee passing rate of 100%, you use your 210-060 Implementing Cisco Collaboration Devices v1.0 exam to try our cisco 210-060 CICD dumps, this is correct, we can guarantee your success. Some people say that to pass the Cisco 210-060 exam certification is tantamount to success. Yes, this is true. You get what you want is one of the manifestations of success. Passtcert of cisco 210-060 CICD dumps are the source of your success.

Related article: http://70-765-test.blogspot.com/2017/09/latest-ccna-collaboration-210-060-cicd.html

Wednesday, September 20, 2017

Update Cisco Certification 200-125 dumps book

Moreover, we also provide you with a year of free after-sales service to update the Cisco Certification 200-125 dumps book. Do not hesitate! Please select Passtcert, it will be the best guarantee for you to pass 200-125 certification exam. Now please add Passtcert to your shopping cart.Passtcert can provide you with a reliable and comprehensive solution to pass Cisco certification 200-125 exam.

Share some CCNA Routing and Switching 200-125 exam questions and answers below.
Which command sequence can you enter to create VLAN 20 and assign it to an interface on a switch? 
A. Switch(config)#vlan 20 
Switch(config)#Interface gig x/y 
Switch(config-if)#switchport access vlan 20 
B. Switch(config)#Interface gig x/y 
Switch(config-if)#vlan 20 
Switch(config-vlan)#switchport access vlan 20 
C. Switch(config)#vlan 20 
Switch(config)#Interface vlan 20 
Switch(config-if)#switchport trunk native vlan 20 
D. Switch(config)#vlan 20 
Switch(config)#Interface vlan 20 
Switch(config-if)#switchport access vlan 20 
E. Switch(config)#vlan 20 
Switch(config)#Interface vlan 20 
Switch(config-if)#switchport trunk allowed vlan 20 
Answer: A

Which function does IP SLA ICMP ECHO operation perform to assist with troubleshooting 
A. packet-loss detection 
B. congestion detection 
C. hop-by-hop response time 
D. one way jitter measurement 
Answer: C 


Which feature can you implement to reserve bandwidth for VoIP calls across the call path? 
A. PQ 
B. CBWFQ 
C. round robin 
D. RSVP 
Answer: D 

What will happen if a private IP address is assigned to a public interface connected to an ISP? 
A. Addresses in a private range will be not routed on the Internet backbone. 
B. Only the ISP router will have the capability to access the public network. 
C. The NAT process will be used to translate this address in a valid IP address. 
D. Several automated methods will be necessary on the private network. 
E. A conflict of IP addresses happens, because other public routers can use the same range. 
Answer: A

If primary and secondary root switches with priority 16384 both experience catastrophic losses, which tertiary switch can take over? 
A. a switch with priority 20480 
B. a switch with priority 8192 
C. a switch with priority 4096 
D. a switch with priority 12288 
Answer: A

What are types of IPv6 static routes? (Choose Three.) 
A. Recursive routes 
B. Directly connected routes 
C. Fully specified routes 
D. Advertised routes 
E. Virtual links 
F. Redistributed routes 
Answer: ABC

In this competitive IT industry, having some authentication certificate can help you promote job position. Many companies that take a job promotion or increase salary for you will refer to how many gold content your authentication certificates have. Cisco 200-125 is a high gold content certification exam. Cisco 200-125 authentication certificate can meet many IT employees' needs. Passtcert can provide you with Cisco Certification 200-125 dumps book.

With Passtcert Cisco Certification 200-125 dumps book, you will pass the exam easily.Do you want to pass the Cisco 200-125 exam better and faster? Then please select the Passtcert. It can help you achieve your dreams. Passtcert is a website that provide accurate Cisco Certification 200-125 dumps book for people who want to participate in the IT certification. Passtcert can help a lot of IT professionals to enhance their career blueprint. Because it relates to their future fate. CCNA Routing and Switching 200-125 exam training materials are the Cisco Certification 200-125 dumps book that each candidate must have.

Related article: http://300-070-real-qa.blogspot.com/2017/09/update-cisco-200-125-certification.html

Update Netapp NS0-158 real exam questions

Passtcert Netapp NS0-158 real exam questions are the most effective way to pass the certification exam. With this certification, you will achieve your dreams, and become successful.Passtcert Netapp NS0-158 real exam questions are virtually risk-free for you at the time of purchase. Before you buy, you can enter Passtcert website to download the free part of the exam questions and answers as a trial.


The person who has been able to succeed is because that he believed he can do it. Passtcert is able to help each IT person, because it has the capability. Passtcert Netapp NS0-158 real exam questions can help you to pass the exam. Any restrictions start from your own heart, if you want to pass the Network Appliance NS0-158 examination, you will choose the Passtcert.I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry.
Share some Network Appliance NCDA Certification NS0-158 exam questions and answers below.
A customer has LUNs that are being accessed through iSCSI. The applications have experienced increased LUN latency over the last couple of days. 
Which two components should you review to determine what caused the rise in latency? (Choose two.) 
A. node CPU utilization 
B. FC switch performance 
C. Ethernet network performance 
D. cluster management switch performance 
Answer: A,C

Your company just purchased four additional FAS8060 nodes to add to an existing 12-node NAS cluster made up of FAS6290s. 
After joining the four new nodes, how many more nodes are allowed before you reach the maximum supported configuration for a mixed FAS6290/8060 cluster? 
A. 8 
B. 2 
C. 4 
D. 16 
Answer: A 


Which data protocol is available to use on an SVM? 
A. FTP 
B. CIFS 
C. HTTP 
D. TFTP 
Answer: B

A customer wants to use jumbo frames on an interface group called a0a. Interface group a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the customer tries to enable jumbo frames on a0a-510 the command fails. 
What caused the failure? 
A. The MTU size must be set on the broadcast domain to which the ports belong. 
B. The LIF corresponding with VLAN 510 is not configured for jumbo frames. 
C. Ports e0c and e0d have conflicting MTU sizes configured. 
D. Jumbo frames must be enabled from the advanced privilege set. 
Answer: A

You notice your indirect I/O performance between nodes in your 4-node cluster is slowing down from prior week. Each node has two 10 GB connections to the cluster interconnect, one to each switch. You are using four out of 12 available ports on each cluster interconnect switch. Your cluster network utilization is over 80%. 
What should you do to increase cluster interconnect performance? 
A. Change the SFP+ from 10 Gb to 16 Gb on each node and switch. 
B. Add two more cluster interconnect connections per node. 
C. Add additional ISLs between the two cluster interconnect switches. 
D. Change the cable from TwinAx to optical with SFP+ for better throughput. 
Answer: B

You create an SVM named svm7. Its DNS name is ntap7. In svm7, you create a volume named vol1 with a junction path of /users. 
An NFS client would mount the root of vol1 using which path? 
A. svm7:/users 
B. ntap7:/users 
C. ntap7:/vol1 
D. svm7:/vol1 
Answer: B

You create a 150 GB thick-provisioned volume. In that volume, you create a 50 GB LUN with space-reserve enabled. You create another 50 GB LUN with space-reserve disabled. 
Before any data is written to either LUN or a Snapshot is taken, how much space will be available in the volume for additional LUNs? 
A. 150 GB 
B. 100 GB 
C. 75 GB 
D. 50 GB 
Answer: B

The NS0-158 NetApp Certified Data Administrator, ONTAP are produced by the IT specialist professional experience. Passtcert just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our Passtcert Netapp NS0-158 real exam questions have 100% accuracy. Purchasing Netapp NS0-158 real exam questions of Passtcert you can easily obtain Network Appliance certification and so that you will have a very great improvement in IT area.

Related article: http://70-761-dumps.blogspot.com/2017/09/update-netapp-certification-ns0-158.html

Monday, September 18, 2017

Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumps Passtcert

Passtcert Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumps will be most suitable for you. Quickly registered Passtcert website please, I believe that you will have a windfall.Through Passtcert you can get the latest Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumps. Please purchase it earlier, it can help you pass your first time to participate in the Cisco certification 300-320 exam. Currently, Passtcert uniquely has the latest Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumpsPasstcert is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams.

Share some CCDP 300-320 exam questions and answers below.
Refer to the exhibit. 



A network engineer manually reconfigures the BGP configuration on newly upgraded router R1. 
However, the BGP neighbor relationship does not come up with the directly connected neighbor router. 
What is causing the failure of the BGP neighbor relationship between routers R1 and R2? 
A. An incorrect neighbor IP address for router R2 is configured on router R1. 
B. An incorrect neighbor AS number is configured on router R1 for router R2. 
C. The wrong BGP authentication password is configured on router R1. 
D. Router R1 must configure the R2 loopback address as the neighbor IP address. 
Answer: C

Which technology fulfills these requirements? 
• Utilize a connection that must support a range of traffic, voice, video, and data. 
• This traffic must also support transmission via a fixed blank 53-byte cell. 
A. PPP 
B. Frame Relay 
C. ATM 
D. MPLS 
E. X.25 
Answer: C

What is an advantage of having an out-of-band management? 
A. It is less expensive to have an out-of-band management. 
B. Network devices can still be managed, even in case of network outage. 
C. There is no separation between the production network and the management network. 
D. SSH protocol must be used to manage network devices. 
Answer: B

Which practice is recommended when designing scalable OSPF networks? 
A. Maximize the number of routers in an area. 
B. Minimize the number of ABRs. 
C. Minimize the number of areas supported by an ABR. 
D. Maximize the number of router adjacencies. 
Answer: C

Which Nexus feature enables you to support server connectivity with one topology and address requirement for both high availability and high bandwidth? 
A. vPC 
B. vPC+ 
C. Stackwise 
D. EvPC 
Answer: D 

Which type of connectivity is required for VPLS? 
A. Full mesh 
B. Partial mesh 
C. Star 
D. Bus 
E. Ring 
Answer: A

Port security supports which type of port? 
A. SPAN destination port 
B. EtherChannel port-channel port 
C. Nonnegotiating trunk port 
D. DTP-enabled trunk port 
Answer: C


Passtcert expert team has developed a latest short-term effective Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumps, which is a 20 hours of training for the candidates of Cisco certification 300-320 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass Cisco certification 300-320 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

And professional study materials about Cisco certification 300-320 exam is a very important part. Our Passtcert can have a good and quick provide of professional Designing Cisco Network Service Architectures 300-320 ARCH exam latest dumps. Our Passtcert IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. Passtcert is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.

Related article: http://300-070-real-qa.blogspot.com/2017/09/cisco-ccdp-300-320-arch-dumps-pdf.html

Friday, September 15, 2017

Update Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers

This may cause you clueless when you prepare the Cisco 300-360 exam. Passtcert Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers are effective training materials that proven by professionals and the candidates who passed the exam. It can help you to pass the exam certification easily.Passtcert free update our Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers, which means you will always get the latest 300-360 exam training materials. If 300-360 exam objectives change, The Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answersPasstcert provided will follow the change. Passtcert know the needs of each candidate, we will help you through your 300-360 exam certification.

Share some CCNP Wireless 300-360 exam questions and answers below.
An 802.11n implementation is being discussed. Users are satisfied with the potential 300­450 Mbps throughput of new 802.11n APs. 
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.) 
A. 450 Mbps throughput is the client max for 5-GHz radio. 
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link. 
C. 300 Mbps throughput is the client max for 2.4-GHz radio. 
D. The remaining bandwidth is divided per device when more clients are connected to one AP. 
E. 100 Mbps Ethernet switch port is a potential bottleneck. 
F. Clean Air helps clear noise for 802.11n channel bonding to work. 
Answer: A,C,E

A Cisco 7925 phone at a client’s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of messages should the phone be sending at this point? 
A. H.245 
B. H.323 
C. MCGP 
D. SCCP 
Answer: D

The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. 
What is the target value for the cell edge reading? 
A. -62 dBm 
B. -67 dBm 
C. -60 dBm 
D. -70 dBm 
Answer: B

An engineer is planning for a 24 Mbps data rate for a new installation. 
What is the coverage area from the AP if the environment and other factors are not taken into consideration? 
A. 225 feet 
B. 80 feet 
C. 150 feet 
D. 100 feet 
Answer: B

An engineer must design wireless coverage in thick-walled stairwells. 
Which information should the engineer refer to when determining where APs can be installed? 
A. Local or National Building Code 
B. IEEE 
C. BICSI TDMM 
D. Cisco Hardware Installation Guide 
Answer: A

The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading? 
A. -62 dBm 
B. -67 dBm 
C. -60 dBm 
D. -70 dBm 
Answer: A

An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.) 
A. 450 Mbps throughput is the client max for 5-GHz radio. 
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link. 
C. 300 Mbps throughput is the client max for 2.4-GHz radio. 
D. The remaining bandwidth is divided per device when more clients are connected to one AP. 
E. 100 Mbps Ethernet switch port is a potential bottleneck. 
F. CleanAir helps clear noise for 802.11n channel bonding to work. 
Answer: A,C,E

Our Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers are including all the questions which the exam required. So the materials will be able to help you to pass the exam.Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers of Passtcert is devoloped in accordance with the latest syllabus. At the same time, we also constantly upgrade our training materials. So our exam training materials is simulated with the practical exam. So that the pass rate of Passtcert is very high. It is an undeniable fact. Through this we can know that Passtcert Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers can brought help to the candidates.


After all, this is an authoritative test to inspect the computer professional knowledge and information technology ability. In order to pass the Cisco certification 300-360 exam, generally, many people need to spend a lot of time and effort to review.Passtcert can provide a shortcut for you and save you a lot of time and effort. Passtcert will provide good Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam answers and help you pass Cisco certification 300-360 exam.

Related article: http://70-761-dumps.blogspot.com/2017/09/update-cisco-certification-300-360.html